ONE EUROPROGETTI AUTOMATIC LINE TYPE “EP175L” FOR THE PRODUCTION OF
Consisting of:
One Type “EPQ175S./1” Automatic Quad Stayer
High Pile Feeder for Board Blanks
Feeder with non-stop device.
Double board blanks warning system with machine stop
Board blanks feeding through suckers with lift at the front edge
Sliding system with rolls and belts at adjustable speed to eliminate breaking of board blanks
Precise location of board blanks under forming block with pushers
Precision adjustment of forming block position through brushless motor
Large diameter thermo-tape reels located on the side of the machine with an “end-of –reel” acoustic signal. Facility to change reel without stopping machine
Thermo tape heat-sealing system with adjustable pressure pads on the corners of forming block
“Cross-shaped” and “T-shaped” stitching system.
Box ejection by cylinder and suction to position the box precisely on conveyor belt
Box transport system to the spotter with 2 operating modes
Digital display and temperature control of the 4 heat sealing tape anvils
One Type “ALFACEH.5” Automatic Gluing Machine – Automatic Glue Viscosity Control Unit
Automatic sheet feeder with lifting the rear of the sheet for the insert of papers up to 300 g/m2
Stainless steel, chromed and rectified glue rolls
Rollers/belt speed automatic adjustment
Vacuum conveyor with running digitally adjustable gap control
Servo driven motor on vacuum conveyor with mm by mm variable step control
Centralised lubrication
Strong aluminium vacuum suction channel with guides for suction conveyor belt
Perforated conveyor belt with higher suction capacity to the centre
Additional vacuum box for small sheets
Controlled acceleration and deceleration of conveyor belt, motor driven
Auto sheet detection – if glue pickers not lowered, paper will not feed
Glue Tank “GTCEC02”with capacity of 70 litres
Anti-air bubbles system – PATENTED
One Type “EPS175S.” Automatic Spotter
Choice left or right-hand side
Suction speed adjustable with inverter
Box unloading even without research
Paper reading by three optic fibres and hydraulic control unit
Mechanical guide unit to control box movement during positioning
Simple size change-over
One Type “EPW175S.” Automatic Wrapping Machine
The wrapper is the Master of the line
Possibility of „T‟ shape wrap for boxes up to 60 mm width
Correct ergonomic working height
Work cycle controlled by P.L.C – no mechanical cam
Possibility to lift box from belt
Easy fixing and locking tools
Regulating pressing time up to 9,99 seconds
Standard or sequential inside turn-in
Possibility of inside wrapping up to 70 mm
800 job programs storage
Technical specifications of the line
| Modem | EP 175 |
| Size of the paper sheets | Min: 12,3 x 8,8 cm ,Max; 90 x 72 cm |
| Box size | Min: 6,5 x 3 x 1,2 cm, Max: 60 x 40 x18,5 cm |
| Speed | 34 cycles/minutes |
| Compressed air supply | 5 – 7 bars |
| Compressed air consumption in operation | 580 Nl/min |
| Electrical power | 11,5 Kw |
| Paper pile height | 380 mm |
| Cardboard | Min: 7 x 10,5 cm, Max: 69 x 88 cm |
| Cardboard thickness | 0,7 mm up to 3 |
| Dimensions | LXWXH: 7,59 x 4,39 x 3,82 m |
| Net weight | 5.170 kg |