ONE EUROPROGETTI AUTOMATIC LINE TYPE “EP175L” FOR THE PRODUCTION OF

Consisting of:

One Type “EPQ175S./1” Automatic Quad Stayer

High Pile Feeder for Board Blanks

Feeder with non-stop device.

Double board blanks warning system with machine stop

Board blanks feeding through suckers with lift at the front edge

Sliding system with rolls and belts at adjustable speed to eliminate breaking of board blanks

Precise location of board blanks under forming block with pushers

Precision adjustment of forming block position through brushless motor 

Large diameter thermo-tape reels located on the side of the machine with an “end-of –reel” acoustic signal. Facility to change reel without stopping machine

Thermo tape heat-sealing system with adjustable pressure pads on the corners of forming block

“Cross-shaped” and “T-shaped” stitching system.

Box ejection by cylinder and suction to position the box precisely on conveyor belt

Box transport system to the spotter with 2 operating modes

Digital display and temperature control of the 4 heat sealing tape anvils

One Type “ALFACEH.5” Automatic Gluing Machine – Automatic Glue Viscosity Control Unit

Automatic sheet feeder with lifting the rear of the sheet for the insert of papers up to 300 g/m2

Stainless steel, chromed and rectified glue rolls

Rollers/belt speed automatic adjustment

Vacuum conveyor with running digitally adjustable gap control

Servo driven motor on vacuum conveyor with mm by mm variable step control

Centralised lubrication

Strong aluminium vacuum suction channel with guides for suction conveyor belt

Perforated conveyor belt with higher suction capacity to the centre

Additional vacuum box for small sheets

Controlled acceleration and deceleration of conveyor belt, motor driven

Auto sheet detection – if glue pickers not lowered, paper will not feed

Glue Tank “GTCEC02”with capacity of 70 litres

Anti-air bubbles system – PATENTED

One Type “EPS175S.” Automatic Spotter

Choice left or right-hand side

Suction speed adjustable with inverter

Box unloading even without research

Paper reading by three optic fibres and hydraulic control unit

Mechanical guide unit to control box movement during positioning

Simple size change-over

One Type “EPW175S.” Automatic Wrapping Machine

The wrapper is the Master of the line

Possibility of „T‟ shape wrap for boxes up to 60 mm width

Correct ergonomic working height

Work cycle controlled by P.L.C – no mechanical cam

Possibility to lift box from belt

Easy fixing and locking tools

Regulating pressing time up to 9,99 seconds

Standard or sequential inside turn-in

Possibility of inside wrapping up to 70 mm

800 job programs storage 

Technical specifications of the line

Modem	EP 175
Size of the paper sheets	Min: 12,3 x 8,8 cm ,Max; 90 x 72 cm
Box size	Min: 6,5 x 3 x 1,2 cm, Max: 60 x 40 x18,5 cm
Speed	34 cycles/minutes
Compressed air supply	5 – 7 bars
Compressed air consumption in operation	580 Nl/min
Electrical power	11,5 Kw
Paper pile height	380 mm
Cardboard	Min: 7 x 10,5 cm, Max: 69 x 88 cm
Cardboard thickness	0,7 mm up to 3
Dimensions	LXWXH: 7,59 x 4,39 x 3,82 m
Net weight	5.170 kg